ZLG致远电子周立功CAN防雷电涌保护器CAN总线连接器网络端子连接器
$
20.44
Qty:
In stock
30-day Return Policy,
Learn More
Description
Product Detail
Product Overview
ZF series bus signal protector is a dedicated bus protection product for industrial communication produced by Guangzhou Zhiyuan Electronics Co., Ltd. It meets the requirements of IEC 61643-21 and YD/T1542-2006 standards and is suitable for RS-485, CAN-bus and the same working voltage. Signal protection for transmission rates within the same specification. Protect sensitive high-speed communication network lines from damage caused by surge induced voltages, power disturbances, electrostatic discharges, etc.
TEZ series CAN bus connector is produced by Guangzhou Zhiyuan Electronics Co., Ltd. It is used to quickly connect field devices to CAN-bus network, and can also be used as network terminal connector, tee connector, and standard converter. Precautions:
1. The lightning arrester is connected in series between the protected equipment and the signal channel.
2. The input end (IN) of the lightning arrester is connected to the signal channel, and the output end (OUT) is connected to the input end of the protected equipment, which cannot be reversed.
3. Reliably connect the ground wire of the lightning protection device to the ground wire of the lightning protection system.
4. This product does not require special maintenance. When there is a fault in the system and the arrester is suspected, the arrester can be removed and checked again. If the system returns to normal after returning to the state before use, the arrester should be replaced.
TEZ series CAN bus connector is produced by Guangzhou Zhiyuan Electronics Co., Ltd. It is used to quickly connect field devices to CAN-bus network, and can also be used as network terminal connector, tee connector, and standard converter. Precautions:
1. The lightning arrester is connected in series between the protected equipment and the signal channel.
2. The input end (IN) of the lightning arrester is connected to the signal channel, and the output end (OUT) is connected to the input end of the protected equipment, which cannot be reversed.
3. Reliably connect the ground wire of the lightning protection device to the ground wire of the lightning protection system.
4. This product does not require special maintenance. When there is a fault in the system and the arrester is suspected, the arrester can be removed and checked again. If the system returns to normal after returning to the state before use, the arrester should be replaced.
Product Parameter
Product Picture
Specification
item | value |
Place of Origin | China |
Guangdong | |
Brand Name | ZLG |
Model Number | CAN lightning surge protector |
Product name | ZF-12Y2-D/TEZ-C01A |
customers reviews ( 0 )
0
/ 5.0
5 stars
0%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%
Company Information
Customer Service
COMPANY INTRODUCTION
